About ALPHATEC® 440
Modified Epoxy Resin-Based Adhesive
ALPHATEC® 440 is a two-part epoxy adhesive designed to bond fresh concrete securely to existing structures. Its extended working time (up to two hours at 25 °C) and controlled flow characteristics allow precise application by brush, roller, or spray—even on vertical or overhead surfaces.
Once cured, it delivers high compressive and flexural strengths, forming a unified, long-lasting repair or extension.
Features
Strong chemical bond for monolithic concrete repairs
Good shear and compressive strength (approximately 84 MPa)
Minimal shrinkage for accurate structural alignment
Open time suitable for larger jobs (140–200 minutes at 25 °C)
ALPHATEC® 440 offers a dependable epoxy solution for seamless bonding between old and new concrete in construction and repair projects.
Packaging and Mixing
ALPHATEC® 440 is available in 3 L and 6 L pre-dosed kits, typically covering 20–30 m² at around 0.1 mm thickness (surface-dependent).
The resin and hardener mix in a 100:48 ratio by volume at low speed (under 500 rpm) for at least a minute—longer if temperatures are cold. This ensures thorough activation and reduces air entrapment.
The product is solvent-free, resulting in lower flammability risk and a consistent cure without noticeable shrinkage.
Related news
Skid-mounted equipment is widely used across industrial processing plants, refineries, and power stations for its mobility, modularity, and reduced site installation time. But the performance of these skids and the…
Updated from September 2023 In industrial settings and civil infrastructure, maintaining structural integrity is essential. This is not just for safety, but for operational continuity and long-term asset value. One…
Moving a 40-ton press or placing any heavy machinery is never “just another rigging job.” Improper lifts remain one of the costliest—and deadliest—mistakes in heavy industry: the U.S. Bureau of…
