Skip to main content

About ALPHATEC® 440

Modified Epoxy Resin-Based Adhesive

ALPHATEC® 440 is a two-part epoxy adhesive designed to bond fresh concrete securely to existing structures. Its extended working time (up to two hours at 25 °C) and controlled flow characteristics allow precise application by brush, roller, or spray—even on vertical or overhead surfaces.

Once cured, it delivers high compressive and flexural strengths, forming a unified, long-lasting repair or extension.

Features

Strong chemical bond for monolithic concrete repairs
Good shear and compressive strength (approximately 84 MPa)
Minimal shrinkage for accurate structural alignment
Open time suitable for larger jobs (140–200 minutes at 25 °C)

ALPHATEC® 440 offers a dependable epoxy solution for seamless bonding between old and new concrete in construction and repair projects.

Packaging and Mixing

ALPHATEC® 440 is available in 3 L and 6 L pre-dosed kits, typically covering 20–30 m² at around 0.1 mm thickness (surface-dependent).

The resin and hardener mix in a 100:48 ratio by volume at low speed (under 500 rpm) for at least a minute—longer if temperatures are cold. This ensures thorough activation and reduces air entrapment.

The product is solvent-free, resulting in lower flammability risk and a consistent cure without noticeable shrinkage.

Related news

Reciprocating machinery

Understanding and Repairing Reciprocating Machinery

| Machinery Foundations, Alignment | No Comments
Updated from August 2023. Reciprocating machinery uses a back-and-forth motion. It is driven by pistons, plungers, or diaphragms to compress gases, move fluids, or generate power. Thanks to its versatility,…
repairing concrete foundations to maintain machinery stability.

Top Tips for Maintaining and Repairing Concrete Foundations in Industrial Processing Plants

| Machinery Foundations | No Comments
Industrial processing plants rely on sturdy concrete foundations to support heavy machinery and ensure smooth operations. Concrete foundations are essential for supporting heavy loads, withstanding harsh environmental conditions, and maintaining…
Machinery Foundations repair and analysis

Maximise Your Machinery Foundations

| Machinery Foundations | No Comments
Updated from June 1st 2023 In many industrial process plants, rotating machines like compressors, pumps, blowers, fans, presses, generators, mills, and mixers form the backbone of daily operations. While maintenance…