ALPHATEC® 800 High-Performance Epoxy Grout

ALPHATEC® 800 is a high performance, aggregate-filled epoxy grout with superior mechanical and chemical properties. This grout material has been specifically formulated to support heavy machinery on concrete foundations, and when used correctly, will ensure the transfer of static and dynamic loads into the inertia block. It has a maximum working temperature limitation (measured at the contact surface) of 70º C for high accuracy alignment, and 100ºC for general use. It has a maximum working temperature limitation (measured at the contact surface) of 70ºC for high accuracy alignment, and 100ºC for general use.

ALPHATEC® 800 is available in two versions, Standard and Winter grades. The winter grade formulation allows for 24 hour cure times even at temperatures between 0ºC and 10ºC. ALPHATEC® 800 uses the 001 aggregate, which is pigmented green, and meets the UNE-EN 1504-6 requirements.

Packaging and Safety

Packing and Safety ALPHATEC® 800 is packed in a set yielding 50 litres. The components are pre-measured, and should normally be mixed as a unit. Aggregate volume can be adjusted to some extent to obtain optimum flowability at the job site, depending on ambient temperatures, and the depth of grout to be poured.

All ALPHATEC products are intended for industrial use, and should be used only by experienced personnel with proper equipment & training. Always use proper protective clothing, including gloves, face masks or shields, and wash any exposed skin thoroughly after using the product.

See Safety Data Sheets for more information.