About ALPHATEC® 110
Fast Curing Epoxy Grout
ALPHATEC® 110 is an ultra-fast curing, three-part epoxy grout designed for rapid installation of industrial machinery supports.
It reaches high compressive strength within hours, even at lower temperatures, making it ideal for time-sensitive projects in refineries, petrochemical plants, and other heavy-duty environments.
Features
Rapid set times at or below ambient temperatures
Consistently strong mechanical performance
Minimal shrinkage for secure alignment
Proven durability under industrial loads
ALPHATEC® 110 completes a quick, high-strength cure even in chilly conditions.
Key Technical Points
Compressive strength reaches around 95 MPa, with flexural strength at about 30 MPa and robust steel adhesion near 14.6 MPa.
A short pot life (roughly 15 minutes at 25°C) supports accelerated handling, while low thermal expansion helps maintain stability under temperature variations.
Packaging and Mixing
The system comes in a pre-measured kit—resin, hardener, and aggregate. Blend the resin and hardener at low speed for up to one minute, then slowly add the aggregate until fully coated. Use the entire aggregate portion unless otherwise directed.
Once mixed, pour the grout promptly to avoid premature stiffening.
Related news
Updated from August 2023. Reciprocating machinery uses a back-and-forth motion. It is driven by pistons, plungers, or diaphragms to compress gases, move fluids, or generate power. Thanks to its versatility,…
Industrial processing plants rely on sturdy concrete foundations to support heavy machinery and ensure smooth operations. Concrete foundations are essential for supporting heavy loads, withstanding harsh environmental conditions, and maintaining…
Updated from June 1st 2023 In many industrial process plants, rotating machines like compressors, pumps, blowers, fans, presses, generators, mills, and mixers form the backbone of daily operations. While maintenance…
