About ALPHATEC® 130
Epoxy Grout for High Temperature
ALPHATEC® 130 is a high-performance epoxy grout formulated for industrial machinery operating at elevated temperatures—up to around 200°C.
Developed to protect steam turbines, heat exchangers, and other heavy-duty systems, it provides reliable mechanical strength and dimensional stability in harsh conditions.
Features
Consistent load-bearing performance up to 200°C
Minimal shrinkage for precise alignment
High compressive strength (about 95 MPa at 23°C)
Low thermal expansion to help minimize distortion
ALPHATEC® 130 has dependable high-temperature performance for critical industrial equipment.
Packaging and Mixing
Pre-measured kits of 10 or 50 liters include resin, hardener, and AT 001 aggregate. Mix the resin and hardener at low speed for under a minute, then gradually add aggregate until fully coated.
A working time of roughly 220 minutes at 23°C ensures sufficient handling in large-scale operations.
Follow standard PPE protocols and avoid overmixing to prevent air entrapment.
Related news
Skid-mounted equipment is widely used across industrial processing plants, refineries, and power stations for its mobility, modularity, and reduced site installation time. But the performance of these skids and the…
Updated from September 2023 In industrial settings and civil infrastructure, maintaining structural integrity is essential. This is not just for safety, but for operational continuity and long-term asset value. One…
Moving a 40-ton press or placing any heavy machinery is never “just another rigging job.” Improper lifts remain one of the costliest—and deadliest—mistakes in heavy industry: the U.S. Bureau of…
